PEUGEOT 308 I CC (4B) Spare Parts
- Parts
- 29
- Engine Variants
- 11
- Production
- 04.2009 - 12.2015
PartsB2B lists 29 spare parts that fit the PEUGEOT 308 I CC (4B) (04.2009 - 12.2015), supplied by ASMETAL, OKSAN KAUÇUK, NARİN KAUÇUK, MES KAUÇUK, ÜÇEL, MEHA AUTOMOTIVE. Fitment is based on manufacturer OEM cross-references. The model is available in 11 engine variants; check yours against the list below before ordering.
Engine Variants Confirm your exact variant before ordering.
- 1.6 16V, Year of Construction 06.2009 - 12.2014, 1598 ccm, 120 hp
- 1.6 16V, Year of Construction 06.2009 - 12.2014, 1598 ccm, 140 hp
- 1.6 16V, Year of Construction 06.2009 - 12.2014, 1598 ccm, 150 hp
- 1.6 16V, Year of Construction 06.2009 - 12.2014, 1598 ccm, 156 hp
- 1.6 HDi, Year of Construction 02.2009 - 05.2012, 1560 ccm, 111 hp
- 1.6 HDi, Year of Construction 03.2013 - 12.2014, 1560 ccm, 114 hp
- 1.6 HDi, Year of Construction 06.2009 - 12.2014, 1560 ccm, 112 hp
- 1.6 THP, Year of Construction 10.2010 - 12.2014, 1598 ccm, 200 hp
- 1.6, Year of Construction 07.2009 - 12.2014, 1598 ccm, 175 hp
- 2.0 CVVT, Year of Construction 07.2009 - 12.2014, 1997 ccm, 140 hp
- 2.0 HDi, Year of Construction 06.2009 - 12.2014, 1997 ccm, 163 hp
Compatible Parts Showing 29 of 29
Axial Joint
Product OEMs (4)
Stabiliser Mounting
Product OEMs (6)
Axle Beam Bushing
Product OEMs (3)
Stabilizer bar rubber (Ø22,5 mm)
Product OEMs (3)
SPARE WATER TANK PIPE
Product OEMs (1)
HOSE FOR FUEL INJECTOR PIPE
Product OEMs (1)
WESTINGHOUSE PIPE
Product OEMs (1)
FUEL PIPE
Product OEMs (1)
FUEL PIPE
Product OEMs (1)
RADIATOR UPPER HOSE
Product OEMs (1)
SUSPENSION STRUT SUPPORT MOUNT KIT
Product OEMs (4)
AXLE BEAM BUSHING(REAR RH / LH)
Product OEMs (7)
SUSPENSION BUSH
Product OEMs (6)
STABILISER BAR MOUNTING (FRONT RH / LH)
Product OEMs (6)
STABILISER BAR MOUNTING ( FRONT RH / LH ) 2 PCS
Product OEMs (6)
MASTER CYLINDER, CLUTCH
Product OEMs (6)
FUEL HOSE
Product OEMs (1)
FILTER,CABIN AIR
Product OEMs (2)
BOOT- CARGO / AREA GAS SPRING 392 mm
Product OEMs (3)
FRONT COWLING ( FRONT )
Product OEMs (1)
TOW HOOK FLAP ( REAR )
Product OEMs (1)
BUMPER MOUNTING BRACKET
Product OEMs (1)
BUMPER TRIM PROTECTION STRIP ( RH FRONT )
Product OEMs (1)
BUMPER TRIM PROTECTION STRIP ( RH FRONT ) 2 PCS
Product OEMs (1)
BUMPER TRIM PROTECTION STRIP ( RH REAR )
Product OEMs (1)
FRONT BUMPER FASCIA
Product OEMs (1)
BUMPER TRIM PROTECTION STRIP ( FRONT )
Product OEMs (2)
SPOILER ( FRONT )
Product OEMs (1)
FRONT COIL SPRING RH / LH
Product OEMs (3)
Frequently Asked Questions
How do I know a part fits my PEUGEOT 308 I CC (4B)?
Every part listed here is cross-referenced to this model through the manufacturer's OEM numbering. Check the engine variant list on this page against your vehicle registration, then confirm the OEM number on the product page.
How do I order a part for my PEUGEOT 308 I CC (4B)?
PartsB2B is a B2B marketplace, not a shop. Open the product you need and contact the supplying manufacturer directly by email or WhatsApp — there is no intermediary.