FORD Focus Mk1 Estate (DNW) Spare Parts
Production 02.1999 - 12.2007 193 parts 11 Engine Variants
PartsB2B lists 193 spare parts that fit the FORD Focus Mk1 Estate (DNW) (02.1999 - 12.2007), supplied by ASMETAL, OKSAN KAUÇUK, TURK AUTO, AKTRUCK, NARİN KAUÇUK, MES KAUÇUK. Fitment is based on manufacturer OEM cross-references. The model is available in 11 engine variants; check yours against the list below before ordering.
Engine Variants Confirm your exact variant before ordering.
- 1.4 16V, Year of Construction 02.1999 - 11.2004, 1388 ccm, 75 hp
- 1.6 16V Flexifuel, Year of Construction 01.2002 - 11.2004, 1596 ccm, 102 hp
- 1.6 16V, Year of Construction 02.1999 - 11.2004, 1596 ccm, 100 hp
- 1.8 16V, Year of Construction 02.1999 - 11.2004, 1796 ccm, 115 hp
- 1.8 BiFuel, Year of Construction 02.2003 - 01.2005, 1796 ccm, 111 hp
- 1.8 DI / TDDi, Year of Construction 08.1999 - 11.2004, 1753 ccm, 75 hp
- 1.8 TDCi, Year of Construction 03.2001 - 11.2004, 1753 ccm, 115 hp
- 1.8 TDCi, Year of Construction 08.2002 - 11.2004, 1753 ccm, 100 hp
- 1.8 Turbo DI / TDDi, Year of Construction 02.1999 - 11.2004, 1753 ccm, 90 hp
- 2.0 16V, Year of Construction 02.1999 - 11.2004, 1988 ccm, 131 hp
- ST170 2.0, Year of Construction 08.2002 - 11.2004, 1988 ccm, 173 hp
Compatible Parts Showing 60 of 193
Ball Joint Lower
Product OEMs (28)
Tie Rod End Left
Product OEMs (11)
Axial Joint
Product OEMs (8)
Stabiliser Link Rear
Product OEMs (4)
Silentblock for TCA
Product OEMs (21)
Silentblock for Stabiliser Link
Product OEMs (5)
Engine Mounting
Product OEMs (8)
Silentblock for TCA
Product OEMs (17)
Stabiliser Mounting
Product OEMs (3)
Suspension Support Buffer Front
Product OEMs (3)
Engine Mounting
Product OEMs (10)
Gearbox mounting
Product OEMs (7)
Engine mounting
Product OEMs (5)
Small bush for wishbone
Product OEMs (4)
Big bush for wishbone
Product OEMs (4)
Bush for rear wishbone, small
Product OEMs (6)
Bush for rear wishbone, big
Product OEMs (6)
Bush for track rod
Product OEMs (11)
Bush for rear wishbone, Kit
Product OEMs (6)
Stabilizer bushing 12x32x36
Product OEMs (5)
Stabilizer Link
Product OEMs (8)
Engine mounting, wet bracket
Product OEMs (12)
Shock Absorber Chock
Product OEMs (9)
Axle bellows, kit
Product OEMs (1)
Gearbox Mounting
Product OEMs (15)
Stabilizer bar rubber,rear (Ø18 mm)
Product OEMs (3)
Shock absorber bellows (thermoplastic)
Product OEMs (2)
Balance arm bush
Product OEMs (1)
Gas Wire Daf CF85
Product OEMs (2)
Rubber Bushing
Product OEMs (2)
Expansion Tank Hose 31x31x810 mm
Product OEMs (1)
JOINT CROSS
Product OEMs (1)
BRAKE CYLINDER
Product OEMs (2)
BRAKE CYLINDER
Product OEMs (4)
CAB TILT HOSE
Product OEMs (2)
TURBO HOSE
Product OEMs (4)
TURBO HOSE
Product OEMs (8)
AIR FILTER HOSE
Product OEMs (2)
OIL STEAM HOSE
Product OEMs (3)
RADIATOR OUTLET HOSE
Product OEMs (8)
RADIATOR INLET HOSE
Product OEMs (6)
HEATER INLET HOSE
Product OEMs (6)
RADIATOR INLET HOSE
Product OEMs (4)
TURBO HOSE 2 LAYERS POLYESTER HAS BEEN USED
Product OEMs (8)
HEATER HOSE EXCLUDING METAL PIPE
Product OEMs (4)
FUEL PIPE
Product OEMs (10)
FUEL PIPE
Product OEMs (8)
RECIRCULATION PIPE
Product OEMs (4)
AIR FILTER HOSE
Product OEMs (2)
OIL STEAM HOSE
Product OEMs (4)
FUEL PIPE
Product OEMs (4)
HC+32 CLIPS FOR CONNECTOR
Product OEMs (1)
HOSE FOR FUEL INJECTOR PIPE
Product OEMs (4)
OIL PUMP PIPE
Product OEMs (7)
RADIATOR HOLDER RUBBER
Product OEMs (2)
TURBO HOSE
Product OEMs (6)
BY PASS PIPE
Product OEMs (4)
TURBO HOSE
Product OEMs (4)
HEATER HOSEEXCEPT METAL PIPE
Product OEMs (4)
HEATER HOSE
Product OEMs (4)
Frequently Asked Questions
How do I know a part fits my FORD Focus Mk1 Estate (DNW)?
Every part listed here is cross-referenced to this model through the manufacturer's OEM numbering. Check the engine variant list on this page against your vehicle registration, then confirm the OEM number on the product page.
How do I order a part for my FORD Focus Mk1 Estate (DNW)?
PartsB2B is a B2B marketplace, not a shop. Open the product you need and contact the supplying manufacturer directly by email or WhatsApp — there is no intermediary.